Victor Professional Cutting Tip, Type 101, Size: 0

Part Number: 0331-0013


Metal Thickness (Inches) 3/8"- 1/2"
Size 0
Part Number 0331-0013
Cutting Oxygen ***(PSIG) 25/30, 30/35
Cutting Oxygen (SCFH) 55/60, 60/65
Preheat Oxygen *(PSIG) 3/5, 3/6
Preheat Oxygen (SCFH) 5/9, 7/11
Acetylene (PSIG) 3/5
Acetylene ****(SCFH) 5/8, 6/10
Speed I.P.M. 24/28, 20/24
Kerf Width 0.06

Data compiled using mild steel as test material.

* Applicable for three hose machine torch only. With a two hose cutting torch, preheat pressure is set by the cutting oxygen.

** For best results use ST2600FC series torches and 3/8" hose when using tip size 6 or larger.

*** All pressures are measured at the regulator using 25' x 1/4" hose through tip size 5 and 25' x 3/8" hose for tip size 6 and larger.

**** Oxygen consumption is 1.1 times the acetylene under neutral flame conditions.

# Clam Shell Packaging

WARNING: At no time should the withdrawal rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour. If additional flow capacity is required use an acetylene manifold system of sufficient size to supply the necessary volume.

  • General purpose
  • Hand and machine torch cutting