Victor Professional Cutting Tip, Type 101, Size: 3


Part Number: 0331-0016

 

Metal Thickness (Inches) 2"- 2 1/2"
Size 3
Part Number 0331-0016
Cutting Oxygen ***(PSIG) 40/45, 45/50
Cutting Oxygen (SCFH) 210/225, 225/240
Preheat Oxygen *(PSIG) 5/14, 5/16
Preheat Oxygen (SCFH) 15/24, 18/29
Acetylene (PSIG) 4/9, 4/10
Acetylene ****(SCFH) 14/22, 16/26
Speed I.P.M. 12/15, 10/13
Kerf Width 0.11

Data compiled using mild steel as test material.

* Applicable for three hose machine torch only. With a two hose cutting torch, preheat pressure is set by the cutting oxygen.

** For best results use ST2600FC series torches and 3/8" hose when using tip size 6 or larger.

*** All pressures are measured at the regulator using 25' x 1/4" hose through tip size 5 and 25' x 3/8" hose for tip size 6 and larger.

**** Oxygen consumption is 1.1 times the acetylene under neutral flame conditions.

# Clam Shell Packaging

WARNING: At no time should the withdrawal rate of an individual acetylene cylinder exceed 1/7 of the cylinder contents per hour. If additional flow capacity is required use an acetylene manifold system of sufficient size to supply the necessary volume.

  • General purpose
  • Hand and machine torch cutting